|
|
|
|
|
| |
|
|
|
|
THE FUTURE IS NOW!
With the introduction of the new 8B 5000™ series aluminum block, BRODIX has taken the 5.0 bore spacing market to the next level. The 8B 5000 combines the size and durability of a 5.0 bore spacing block with the convenience and availablility of its 4.840 bore spacing counterpart. These blocks are 100% CNC machined and employ the same technology that has made BRODIX the undisputed leader in aluminum block development.
|
|
|
|
|
|
|
|
|
|
|
|
8B 5000: 4.585 Bore / 1.0 Raised Cam Location / 11.200 Deck Height
8B 5025: 4.585 Bore / 1.0 Raised Cam Location / 11.625 Deck Height
|
|
|
 |
|
|
• Made in the USA
• All Big Blocks Are Oil Restricted From
the Front (Must Use BRODIX 8B BB Oil
Restrictor - Sold Separately)
• Proprietary A-356 Virgin Aluminum
• Can Be Machined for Roller Cam Bearings
• Strongest Main Webbing in the Business
• 1044 Steel Billet Main Caps
• Splayed Center Main Caps
• Accepts Stroker Oil Pans
• Raised Cam Location (1.0) Standard
• Head Studs Are Available From BRODIX
• Additional Head Bolt Lugs in Deck Area
• Thick Wall Sleeves With 1/4 Inch Registers
Allow Bore Sizes up to 4.700
• Special Sleeves May Be Available for up to 4.750 Bores
• Plug Kit Is Provided With the Block
• The Most User-Friendly 5.0 Bore Spacing
Block in the Industry
|
|
• 11.200 (8B 5000)
• 11.625 (8B 5025)
|
|
|
|
|
|
|
|
• 1.0 Raised Cam Only
|
|
|
|
|
|
|
|
|
• 5.375 Standard
• 5.750 (With Additional Machining)
|
|
|
|
|
 |
|
|
• 50mm Roller Bearings ∆
• Big Block Ford Babbit Bearings Standard*
• Big Block Ford Roller Bearings ∆
• 55mm Babbit Bearings *
• 55mm Roller Bearings ∆
• 60mm Babbit Bearings ∆
*Babbit style cam bearings will require the use of wide cam bearings with 1/4” locks in the center bearings and spiral locks on the two end bearings.
∆ Roller cam bearings use spiral locks on all cam bearings.
|
|
• Outside Main: 85 ft-lb
• Inside Main: 95 ft-lb
All torque specs are based on use of light motor oil.
|
|
|
|
|
|
THE SLEEVES ARE LEFT ABOVE THE DECK OF THE BLOCK INTENTIONALLY.
IT IS THE ENGINE BUILDER'S PREFERENCE WHETHER OR NOT TO SURFACE THE SLEEVES FLAT WITH THE DECK OF THE BLOCK.
|
|
|
|
PART #
SS Blk Machine
SS Special Deck Height
SS Blk Machine Lifter Bores
SS Align Hone
SS Finish Hone Bore
MS Solid Block
|
|
DESCRIPTION
Machine for Roller Cam Bearings
Machine Special Deck Heights
Machine for Special Lifter Bores
Finish Hone of Crankshaft Mains
Finish Hone of Cylinder Bore
Solid Block - No Water
|
|
|
|
PART #
SK HS PB5000
|
|
DESCRIPTION
BRODIX 8B 5000 Aluminum Block Head Stud Kit for PB 5000 Heads
|
Head Studs Are Sold Separately
|
|
|
|
|
|
Untitled Page
|
Phone: (479) 394-1075 • Fax: (479) 394-1996 • 301 Maple • P.O. Box 1347 • Mena, Arkansas 71953
|
| Not legal for sale or use on pollution controlled motor vehicles. |
|
© copyright 2013 by Brodix, Inc.
|
|
|
Permission is granted to view and print materials from Brodix.com for the non-commercial purpose of viewing, reading, and retaining them for reference.
Any other copying, distribution, retransmission, or modification of information or materials on this site - whether in electronic or hard copy form - without the express prior written permission of Brodix, Inc., is strictly prohibited.
|
|
