|
|
|
|
|
|
|
|
The BRODIX foundry has really done a fantastic job this time!
|
| |
The new big block aluminum block is truly a masterpiece. The fit and finish is equalled by none!
A-356 virgin aluminum is used to assure maximum potential for strength and repairability. 1/4" registers position the cast iron sleeves. The sleeves may be bored to 4.600.
The 8B 2000 block may be ordered with many different roller cam bearing sizes ranging from standard Chevrolet compatible to big block Ford compatible roller. Splayed billet main caps are made of 1044 steel and are coated with black oxide. The BRODIX 8B 2000 block is truly a force to be reckoned with!
The 8B 2000A is a direct replacement for cast iron blocks!
|
|
|
|
|
|
|
|
|
8B 2000A*: 4.480 or 4.590 Bore / Standard Cam Location / 9.800 or 10.200 Deck Height
8B 2000C*: 4.480 or 4.590 Bore / Raised Cam Location / 9.800, 10.200, or 10.700 Deck Height
8B 2100C*: 4.480 or 4.590 Bore / Raised Cam Location / 11.100 or 11.200 Deck Height
8B 2200C*: 4.480 or 4.590 Bore / Raised Cam Location / 11.500 or 11.625 Deck Height
|
*Must Specify Deck Height, Cam Bearing Style, and Cam Locations
|
|
|
|
|
|
• Made in the USA
• All Big Blocks Are Oil Restricted From
the Front (Must Use BRODIX Oil
Restrictors - Sold Separately)
• Proprietary A-356 Virgin Aluminum
• Can Be Machined for Roller Cam Bearings
• Strongest Main Webbing in the Business
• 1044 Steel Billet Main Caps
• Splayed Center Main Caps
• Accepts Standard or Stroker Oil Pans
• Raised Cam Location Available
• Head Studs Are Available From BRODIX
• Additional Head Bolt Lugs in Deck Area
• Thick Wall Sleeves With 1/4 Inch Registers
Allow Bore Sizes up to 4.600
• Plug Kit Is Provided With the Block
• Best Block in the Industry
• Small Bore Sleeves Available Upon Request
|
|
• 9.800 or 10.200 (8B 2000A)
• 9.800 or 10.700 (8B 2000C)
• 11.100 or 11.200 (8B 2100C)
• 11.500 or 11.625 (8B 2200C)
*Special Deck Heights May Be Available Upon Request
|
|
|
|
|
|
|
|
• Standard Cam Location
• .400 Raised Cam
|
|
|
|
|
|
|
|
|
• Standard Cam Location - 4.750
• Raised Cam Location - 5.0 (With Additonal Machining)
|
|
|
|
|
|
|
|
• Cam Bearings Are Sold Separately
• Big Block Babbit Bearings *
• 50 mm Roller Bearings ∆
• 55 mm Roller Bearings ∆
• 60 mm Babbit Bearings *
*Babbit style cam bearings will require the use of wide cam bearings with 1/4” locks in the center bearings and spiral locks on the two end bearings.
∆ Roller cam bearings use spiral locks on all cam bearings.
|
|
• Outside Main: 85 ft-lb
• Inside Main: 95 ft-lb
All torque specs are based on use of light motor oil.
|
|
|
|
|
|
THE SLEEVES ARE LEFT ABOVE THE DECK OF THE BLOCK INTENTIONALLY.
IT IS THE ENGINE BUILDER'S PREFERENCE WHETHER OR NOT TO SURFACE THE SLEEVES FLAT WITH THE DECK OF THE BLOCK.
|
|
|
|
PART #
SS Blk Machine
SS Special Deck Height
SS Align Hone
SS Finish Hone Bore (ES 405)
MS 1/2 Fill Block
MS Solid Block
|
|
DESCRIPTION
Machine for Roller Cam Bearings
Machine Special Deck Heights
Finish Hone of Crankshaft Mains
Finish Hone of Cylinder Bore (Call for Details)
Half Filled Water Jacket
Solid Block - No Water
|
|
|
|
PART #
SK HS Big Block
SK HS Big Block Dart
SK HS Big Duke
|
|
DESCRIPTION
BRODIX Aluminum Big Block Head Stud Kit for BRODIX Conventional
Heads
BRODIX Aluminum Big Block Head Stud Kit for Dart Conventional Heads
BRODIX Aluminum Big Block Head Stud Kit for Big Duke or Big Chief
Heads
|
Head Studs Are Sold Separately
|
|
|
|
|
|
Untitled Page
|
Phone: (479) 394-1075 • Fax: (479) 394-1996 • 301 Maple • P.O. Box 1347 • Mena, Arkansas 71953
|
| Not legal for sale or use on pollution controlled motor vehicles. |
|
© copyright 2013 by Brodix, Inc.
|
|
|
Permission is granted to view and print materials from Brodix.com for the non-commercial purpose of viewing, reading, and retaining them for reference.
Any other copying, distribution, retransmission, or modification of information or materials on this site - whether in electronic or hard copy form - without the express prior written permission of Brodix, Inc., is strictly prohibited.
|
|
