 |
|
 |
|
 |
| |
|
BRODIX proves that variety is the spice of life with yet another head for the small block Chevy faithful.
This 16° masterpiece was designed with dirt late model and drag racing in mind. It features a new 16° valve angle, a highly efficient and raised spark plug location, moved valve centerlines, and a specially designed combustion chamber.
This head is available 100% CNC ported.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Intake Port
|
Chamber Volume
|
Valve Sizes Intake/Exhaust
|
Plug Angle
|
Exhaust
Pattern
|
Valve
Centerline
|
Intake Manifold
|
KC 16 STD
|
269 cc
|
49 cc
|
2.180/1.625
|
Angle
|
18° Standard
|
58/107
|
Edelbrock 2955/
Edelbrock 2958
|
|
|
|
|
|
|
|
|
|
|
|
|
Cubic Inch
|
Compression
|
Camshaft
|
RPM
|
Application
|
KC 16 STD
|
358 - 430
|
13.5 Minimum
|
Roller
|
4000-7500
|
Oval Track/
Drag Race
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Valve Size
|
0.200
|
0.300
|
0.400
|
0.500
|
0.600
|
0.700
|
KC 16 STD
(CNC Ported)
|
2.180 x 50° Intake
|
142
|
211
|
277
|
332
|
367
|
379
|
1.625 x 45° Exhaust
|
119
|
161
|
198
|
233
|
252
|
261
|
|
|
|
|
 |
|
|
|
• PS CB:
Valve Bowls Blended
• PS MI:
Match Intake Port to BRODIX MG 1600,
MR. GASKET 143
• PS Valve Job:
Competition Valve Job
• Intake Valves:
2.150/2.180/2.200 x 5.550 o.a.l. (50° Seat Angle)
• Exhaust Valves:
1.600/1.625 x 5.500 o.a.l. (45° Seat Angle)
• Valve Springs:
1.550 Roller Valve Spring - GA 1000,
240 lb Closed, 550 lb Open,
1.950 Installed Height,
.700 Maximum Lift
• Retainers:
1.550 10° Titanium - MA 2398BR
• Valve Locks:
10° Jumbo - CC 611
• Rocker Studs:
Shaft System Required
• Valve Seals:
11/32 - US VS529V
|
|
|
 |
• Torque Heads:
70 ft-lb
• Torque Rocker Studs:
40-45 ft-lb
• Intake Gaskets:
BRODIX MG 1600, MR. GASKET 143
• Head Gaskets:
350 - FEL-PRO 1003, COMETIC C5399
400 - FEL-PRO 1004, COMETIC C5403
• Exhaust Gaskets:
FEL-PRO 1407
• Head Studs:
ARP 234-4726 (Cast Iron Block),
SK HSSB 16 (BRODIX Aluminum Block)
• Accessory Bolt Holes Are Drilled
• Spark Plug Starting Points:
NGK R5671A-10 for Alcohol
NGK R5671A-9 for Racing Gas
• Spring Pockets:
1.550 out of the Box, No Larger
or Deeper
• Valve Angle:
16°
• Angle Milling:
.0065 in per cc
• Flat Milling:
.0055 in per cc
• Angle Machining:
Not Available
• Pushrod Slots:
58/107
• Stud Girdle:
Not Available
• Rocker Arms:
JESEL or T&D Shaft System With 58/107 Spacing,
Check Heads for Intake Offset
• Lifters:
.180 Offset
• Pistons:
Special 16°
• Pushrods:
Special Length
• Intake Face Angle:
5°
|
|
|
|
|
|
|
KC 16 STD Bare
|
Standard Exhaust
|
1268000
|
KC 16 STD Pkg
|
Standard Exhaust
|
1268100
|
|
|
|
|
|
|
|
|
|
|
|
Phone: (479) 394-1075 • Fax: (479) 394-1996 • 301 Maple • P.O. Box 1347 • Mena, Arkansas 71953
|
| Not legal for sale or use on pollution controlled motor vehicles. |
|
© 2008 by Brodix, Inc.
|
|
Permission is granted to view and print materials from Brodix.com for the non-commercial purpose of viewing, reading, and retaining them for reference.
Any other copying, distribution, retransmission, or modification of information or materials on this site - whether in electronic or hard copy form - without the express prior written permission of Brodix, Inc., is strictly prohibited.
|
|
