|
|
|
|
 |
| |
|
The 90° V6 head is another fine product offered by Brodix. The V6 cylinder head is available in two different intake ports.
The V6 -8 is for a low rpm, Pro Street style engine. The V6 -10 is for a larger cubic inch engine, higher rpm range, and racing environment.
The Brodix V6 heads are made of virgin A-356 aluminum material and have ductile iron seats and solid phosphorous bronze guides. Helicoils are installed in the rocker stud bosses to assure stability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Intake Port
|
Chamber Volume
|
Valve Sizes Intake/
Exhaust
|
Plug Angle
|
Exhaust
Pattern
|
Valve
Centerline
|
Intake Manifold
|
V6 -8
|
194 cc
|
67 cc
|
2.080/1.600
|
Striaght/Angle
|
Standard
|
Standard
|
Edelbrock Performer 90° V6 (Dual Plane)
|
V6 -10
|
210 cc
|
67 cc
|
2.080/1.600
|
Straight/Angle
|
Standard
|
Standard
|
Edelbrock Performer 90° V6 (Dual Plane)
|
|
|
|
|
|
|
|
|
|
|
|
|
Compression
|
Camshaft
|
RPM
|
Application
|
V6 -8
|
9.1 Minimum
|
Flat Tappet/Roller
|
3800-6800
|
Street
|
V6 -10
|
11.5 Minimum
|
Flat Tappet/Roller
|
4000-7000
|
Pro Street
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Valve Size
|
0.200
|
0.300
|
0.400
|
0.500
|
0.600
|
0.650
|
0.700
|
V6 -8
|
2.080 Intake
|
134
|
191
|
230
|
240
|
|
|
|
1.600 Exhaust
|
110
|
139
|
155
|
161
|
|
|
|
V6 -10
|
2.080 Intake
|
145
|
195
|
240
|
253
|
262
|
262
|
262
|
1.600 Exhaust
|
110
|
139
|
155
|
161
|
166
|
168
|
168
|
|
|
|
|
|
|
|
|
• PS CB:
Valve Bowls Blended
• PS MI:
Match Intake Port to FP 1203
• PS Valve Job:
Competition Valve Job
• Intake Valves:
2.080 x 4.965 o.a.l. - BR 81019D
• Exhaust Valves:
1.600 x 4.965 o.a.l. - BR 81021
• Valve Springs:
1.550 Hydraulic Roller Valve Spring - BT 120121,
140 lb Closed, 400 lb Open,
1.950 installed Height,
.600 Maximum Lift
• Retainers:
1.550 10° Steel - CC 752
• Valve Locks:
10° Jumbo - CC 611
• Rocker Studs:
7/16 - BR 716L, AR RRS-4I
• Guide Plates:
5/16 - CC 4808
• Valve Seals:
11/32 - US VS529V
|
|
|
 |
• Torque Heads:
70 ft-lb
• Torque Rocker Studs:
40-45 ft-lb
• Intake Gaskets:
FEL-PRO 1203
• Valve Cover Gaskets:
FEL-PRO 1601
• Head Gaskets:
FEL-PRO 1002
• Exhaust Gaskets:
FEL-PRO 1403
• Head Bolts:
MANLEY 42313 (V8 KIT)
• Head Bolt Washers:
MANLEY 42102 (V8 KIT)
• Head Studs:
ARP 234-4301 (V8 KIT)
• Accessory Bolt Holes Are Drilled:
• Spark Plug Starting Points:
CHAMPION RN12YC or AUTOLITE 3924
for Pump Gas
NGK R5671A-8 for Racing Gas
• Spring Pockets:
1.550 Out of the Box, May Be Cut to 1.625 -
No Larger or Deeper
• Valve Angle:
23°
• Angle Milling:
.0078 in Per cc
• Flat Milling:
.0060 in Per cc
• Angle Machining:
Not Available
• Dowel Shift:
Not Available
• Pushrod Slots:
Standard
• Stud Girdle:
N/A
• Rocker Arms:
Standard
• Lifters:
Standard
|
|
|
|
|
|
|
|
V6 -8 Bare
|
|
|
V6 -8 Pkg
|
(1.470 Spring)
|
|
V6 -8 Pkg
|
(1.550 Spring)
|
|
V6 -10 Bare
|
|
|
V6 -10 Pkg
|
(1.470 Spring)
|
|
V6 -10 Pkg
|
(1.550 Spring)
|
|
|
|
|
|
|
|
|
|
|
Untitled Page
|
Phone: (479) 394-1075 • Fax: (479) 394-1996 • 301 Maple • P.O. Box 1347 • Mena, Arkansas 71953
|
| Not legal for sale or use on pollution controlled motor vehicles. |
|
© copyright 2013 by Brodix, Inc.
|
|
|
Permission is granted to view and print materials from Brodix.com for the non-commercial purpose of viewing, reading, and retaining them for reference.
Any other copying, distribution, retransmission, or modification of information or materials on this site - whether in electronic or hard copy form - without the express prior written permission of Brodix, Inc., is strictly prohibited.
|
|
