|
|
|
|
|
|
|
|
|
Supplied by SELF RACING
|
|
|
PART #
|
Description
|
SE 1100 X
|
Port Intruder to Fit BRODIX -11X Intake Port
|
SE 1200
|
Port Intruder to Fit BRODIX -12 Intake Port, All Versions
|
SE 1800
|
Port Intruder to Fit BRODIX -18 Intake Port
|
SE 1800 GM
|
Port Intruder to Fit GM 18° Intake Port
|
SE 1800 WT
|
Port Intruder to Fit -18 Weld-Tech 256
|
SE 1900
|
Port Intruder to Fit Canted Valve Intake Port
|
SE 2000 I
|
Port Intruder to Fit BRODIX Big Block Intake Port
|
SE 2000 E
|
Port Intruder to Fit BRODIX Big Block Exhaust Port
|
SE 5000 E
|
Port Intruder to Fit PONTIAC 5427/3386 Exhaust Port
|
|
|
|
Today's engines are so demanding that maximum porting of the cylinder heads is necessary for the best flow. However, maximum porting of cylinder heads often causes cracking in some areas of the intake port and cylinder head deck. The Port Intruder Kit helps prevent cracks from occurring.
The Port Intruder Kit allows the common wall between the two intake ports to be ported without the head bolt intruding into the port. This will eliminate head bolt hole sleeves.
The clamping force of the head bolt is improved by transferring the load directly to the deck of the head which helps to reduce cracking in this area.
The Port Intruder Kit consists of all plugs and components, but the head must be machined to accommodate the port intruders. Installation instructions are included with the purchase of a kit. Some additional porting may be required. Port Intruders are available to fit most BRODIX heads and GM 18° heads.
|
|
|
|
|
|
Phone: (479) 394-1075 • Fax: (479) 394-1996 • 301 Maple • P.O. Box 1347 • Mena, Arkansas 71953
|
| Not legal for sale or use on pollution controlled motor vehicles. |
|
© 2008 by Brodix, Inc.
|
|
Permission is granted to view and print materials from Brodix.com for the non-commercial purpose of viewing, reading, and retaining them for reference.
Any other copying, distribution, retransmission, or modification of information or materials on this site - whether in electronic or hard copy form - without the express prior written permission of Brodix, Inc., is strictly prohibited.
|
|
|
